Two-man crew installing vinyl siding on a Schenectady home

Siding in Schenectady, NY

Priced per square, repaired per panel, with the trim details that keep water out of both.

  • $450–$700 per square installed
  • Single panels matched and swapped
  • Licensed and insured
  • Vinyl and fiber cement

4.7 · 32 Google reviews

Installation, priced the way we price roofs

Siding installation in Schenectady is priced the way we price roofs: vinyl runs $450–$700 per square (a square is 100 square feet) installed, and fiber cement roughly doubles that. The spread inside each range is mostly trim: corners, window wraps, and the J-channel that ties it all off. The estimate itemizes the walls and the trim separately, so you can see where the money actually goes. Siding in Schenectady also has to survive freeze-thaw, which is why the trim details matter more here than the panel brand.

When one panel is the whole job

One cracked panel matches and swaps. Residing a wall for one break is money wasted. Vinyl profiles stay in production for years, and a close match weathers in within a season or two. Where siding meets roofline is where we look hardest either way: kick-out flashing (the small diverter at a roof edge) missing there rots more sheathing than any cracked panel does. Ask the other siding contractors in Schenectady you're comparing to itemize trim the same way. The walls are where bids agree; the trim is where they diverge.

On siding work

$450–$700 per square

Walls and trim itemized separately in the estimate.

Single-panel repairs

Matched, swapped, and not upsold to a wall.

Licensed and insured

Certificates come with the estimate.

How it works

What happens after you call

Taking a repair call at the truck
Describe it We can often price a repair over the phone.
Photographing the roof during an inspection, the photos the customer sees
We look Photos from the roof, shared with you.
Walking through the written estimate at the tailgate
You decide Written scope, the figure, and its unless-clauses.
Setting step flashing at a wall junction
We fix it Permit pulled, decking checked, site cleaned.

Siding costs

Vinyl siding, installed Trim complexity sets the point in range $450–$700 per square
Fiber cement, installed Heavier material, painted finish, longer install $900–$1,400 per square
Single-panel repair Profile match confirmed before we order $400–$550

Typical for Schenectady County. A square is 100 square feet of wall.

Siding questions

Vinyl or fiber cement?

Vinyl at $450–$700 a square is the value play and handles freeze-thaw fine. Fiber cement costs about double, holds paint, and reads as wood from the curb. Both numbers are in the estimate if you're weighing it.

Can you match my existing siding?

Usually. Profiles stay in production for years, and we confirm the match before ordering. A weathered wall won't match a fresh panel exactly; you'll see how close before we start.

Do you do siding and roofing together?

Yes. Siding in Schenectady weathers the same freeze-thaw as the roof above it, and the junction between them is the point of doing both. We do the drip edge, fascia, and kick-out flashing once, with one crew and one warranty conversation.

Free estimate, this week

Or skip the form: call, describe what you're seeing, and we'll tell you what it likely is.

(518) 901-2747